HC-SR04 Enclosure

This is a robust enclosure for the HC-SR04 Distance Sensor / Ultrasonic Range Finder. I originally made this for a Halloween project (the distance sensor was used to trigger some effects when people approach...)

There are two versions of the enclosure:
* housing & front_panel - only just big enough to squeeze in the dupont connectors
* housing_big & front_panel_big - slightly bigger (has 5mm more clearance)

There are also some accessories for mounting:
* bracket - a simple L-bracket
* mount & clamp - suitable to mount on wooden stakes of 5~6mm diameter

Finally, there's a "cowl" which can be used to give some basic protection from the rain (I attached this with double-sided tape). This enclosure not designed to be waterproof for extended use outdoors, but is pretty robust for general indoor use or occasional outdoor use.

I also wrote a Python module to interface the HC-SR04 to the Raspberry Pi which is available here if you need it:
https://github.com/jam3sward/hcsr04-p