Headless Horseman HueForge

Project: Headless Horseman v2b.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 180x220.26mm in sizeYou may print at higher layer heights below the Min Depth of 1.1mmThe Max Depth is 3.1mm and the Actual Depth is 3mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 5 PLA BambuLab Basic Red Transmission Distance: 2 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #19 (1.6mm) swap to Blue Gray At layer #25 (2.08mm) swap to Red At layer #29 (2.4mm) swap to Jade White for the rest.