Thingiverse

Headset / Headphone Holder

by akshay_d21

26 Downloads

19 Likes

0 Makes

Tableside headset/headphone stand with wire clips of two thicknesses on one side and a curved surface on another to prevent creasing on your headphones/headsets.

The stand also has a circular cutout to prevent material wastage, which also doubles as a wire loop.

The stand/holder attached to the underside of a table without screws or any other specialized equipment. I used 3M double-sided adhesive tape and left it to cure for 12 hours. I recommend sanding down the taping surface before the application of double-sided tape. Use a heavy-duty double-sided tape for maximum bondage.

Happy printing!

Source

Thingiverse

What you need to print this: Beginner Low confidence

Why?

print-in-place design · significant post-processing

Print-in-place Hardware needed

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 3/3

Printer

FDM / FFF

File format

STL

Material

Est. print time

12 h

Post-processing

Sanding, Gluing, Hardware

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does Headset / Headphone Holder need supports when printing?

Nope — Headset / Headphone Holder is print-in-place, so it comes off the bed ready to use. No supports, no assembly.

How long does it take to print Headset / Headphone Holder ?

According to the design notes, Headset / Headphone Holder takes approximately 12 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Headset / Headphone Holder available in?

Headset / Headphone Holder is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Headset / Headphone Holder free to download?

Yes, Headset / Headphone Holder is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Headset / Headphone Holder

Similar Models

Add to Collection