Thingiverse
Heartbeat Candle Mold
von Ashak1el
23
Downloads
90
Likes
0
Makes
Heartbeat candle mold
Do not confuse the sequence when connecting parts.
Be sure to coat the mold with a release agent such as Vaseline.
The bottom mold clamp (BottomHBM) needs to be printed in vase mode (spiral mode) using a line width setting of 0.6mm.
I recommend tightening the shape horizontally with elastic bands.
I use 2 wooden wicks 6-7 mm wide
After the candle has hardened, so that there are no gaps in the lower part, you need to add wax into the formed cavity.
I am creating a collection of molds for candles or soap. I will replenish it regularly. The collection is available at https://www.thingiverse.com/ashak1el/collections/40569188/things.
Do not confuse the sequence when connecting parts.
Be sure to coat the mold with a release agent such as Vaseline.
The bottom mold clamp (BottomHBM) needs to be printed in vase mode (spiral mode) using a line width setting of 0.6mm.
I recommend tightening the shape horizontally with elastic bands.
I use 2 wooden wicks 6-7 mm wide
After the candle has hardened, so that there are no gaps in the lower part, you need to add wax into the formed cavity.
I am creating a collection of molds for candles or soap. I will replenish it regularly. The collection is available at https://www.thingiverse.com/ashak1el/collections/40569188/things.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
