Thingiverse
Heat Bed Wire Mount
door chuteroo
17
Downloads
11
Likes
0
Makes
The Thing:
A heat bed wiring fastener that helps provide mechanical support to preserve the integrity of the solder joints.
To Print:
1x Heatbed Clip
2x Heatbed Clip Bar
Vitamins:
Small bolts and nuts to secure the parts together. I used Nylon Lock Nuts Screw Fastener Zinc Plated Black Hex Insert Female M3x0.5mm and M3x14mm Screw Cap Point Hex Socket Screws Bolts.
Epoxy
How to Use:
1). Thread wires through gap in "Heatbed Clip"
2). Position "Heatbed Clip" such that it gently presses the wires against the edge of the heat bed and temporarily clamp it in place
3). Solder wires to the appropriate terminals on the heat bed
4). Screw "Heatbed Clip Bar" onto wires against "Heatbed Clip" using the holes closer to the heat bed. Tighten until the wires cannot move easily. Repeat with distal holes.
5). If satisfied with solder joints and positioning of all parts, epoxy the "Heatbed Clip" to the bottom of the heat bed. Clamp in place until dry.
6). Happy printing!
The
A heat bed wiring fastener that helps provide mechanical support to preserve the integrity of the solder joints.
To Print:
1x Heatbed Clip
2x Heatbed Clip Bar
Vitamins:
Small bolts and nuts to secure the parts together. I used Nylon Lock Nuts Screw Fastener Zinc Plated Black Hex Insert Female M3x0.5mm and M3x14mm Screw Cap Point Hex Socket Screws Bolts.
Epoxy
How to Use:
1). Thread wires through gap in "Heatbed Clip"
2). Position "Heatbed Clip" such that it gently presses the wires against the edge of the heat bed and temporarily clamp it in place
3). Solder wires to the appropriate terminals on the heat bed
4). Screw "Heatbed Clip Bar" onto wires against "Heatbed Clip" using the holes closer to the heat bed. Tighten until the wires cannot move easily. Repeat with distal holes.
5). If satisfied with solder joints and positioning of all parts, epoxy the "Heatbed Clip" to the bottom of the heat bed. Clamp in place until dry.
6). Happy printing!
The
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
