Thingiverse
HEAT boardgame insert
by LarsBonde
22
Downloads
17
Likes
0
Makes
DXF files for lasercutting an insert to the board game "HEAT - pedal to the metal".
Cut 1 of each item, except the following:
Spacer1 = 11 samples
Small_cards = 4 samples (use 2 of the bottoms and 4 walls)
Pictures for the engraving on the top plate and lid are not added.
The color marking should be 3D printet in the 6 different colors.
The lid is closed with a small nut and a magnet.
It is designed for 3mm material, and with no added kerf.
Everything fits nicely, but is also glued together.
Cut 1 of each item, except the following:
Spacer1 = 11 samples
Small_cards = 4 samples (use 2 of the bottoms and 4 walls)
Pictures for the engraving on the top plate and lid are not added.
The color marking should be 3D printet in the 6 different colors.
The lid is closed with a small nut and a magnet.
It is designed for 3mm material, and with no added kerf.
Everything fits nicely, but is also glued together.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
