Heat Insert Press (99% 3D Printed) V2

This is a Modified version of @duck.knapp Heat Set Insert Press.I did not want the big ridge of the original and would rather use drawers in the bottom to store inserts and other soldering tools so i made this remix. ImportantMore Pictures and possibly updates coming soon.The top part does work as intended but I have still not tested the drawer. It Should work but i cant verify this untill i have tested it. The only parts you can not 3D print is:6x 608 zz ball bearings4x M3 inserts4x M3 screws (8-12mm long)2x M3 screws (14mm+)2x M3 hex nuts4x M5 Screws (6-12mm long, If you print the Mainplate with holes)To assemble this you need the following:1x Base plate (either version)4x Arms (either version)6x Pins6x 608 zz ball bearings1x Top1x Holder (17,18 or 19mm variant)Note: The original holder was about 17mm for the soldering iron, This was too tight for my soldering iron as i wanted to keep the silicone handle to help isolate heat. The 19mm variant was slightly too loose so i used the 18mm