Thingiverse
Heat Set Insert Press - Dremel Adapter
di vastempty
149
Download
84
Likes
0
Makes
Wanted to try out heat-set inserts on my next design and didn't want to build or buy a new press when I had a Dremel 220-01 Rotary Tool Work Station sitting on my bench. So I hacked this thing: https://www.thingiverse.com/thing:3468979
Made the adapter collar a bit smaller, tapered, and opened up the latch to allow a power cord thru. (sorry no detailed pictures, see the STL and the original thing to get the idea).
It fits my Weller and a cheap old soldering iron I had sitting around. No need to really crank down the collar, just push up the iron until it holds, and lightly tighten so it does not fall down. The pressure from the inset pushes against the taper of the part.
It uses a 4mm x 20mm screw and nut.
Made the adapter collar a bit smaller, tapered, and opened up the latch to allow a power cord thru. (sorry no detailed pictures, see the STL and the original thing to get the idea).
It fits my Weller and a cheap old soldering iron I had sitting around. No need to really crank down the collar, just push up the iron until it holds, and lightly tighten so it does not fall down. The pressure from the inset pushes against the taper of the part.
It uses a 4mm x 20mm screw and nut.
vastempty pubblica anche su
8 modelli aggiuntivi su altre 1 piattaforme
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
