Heating_Drying_Fan_Docker

这是一个简易的直接配合AMS使用的框架，然后放上一个桌面暖手器，可以实现4小时从湿度50%降到30%，盖上AMS盖子配合干燥剂，可以维持在30%左右。总成本不到100，且一次性可以烘干4卷料，由于温度太高可能会损坏AMS或者料盘，所以不建议用于其他材料，主要适合PLA。 This is a simple framework that can be directly used with AMS. By placing a desktop hand warmer, the humidity in AMS can be reduced from 50% to 30% in 4 hours. With the AMS cover and desiccant, it can be maintained at around 30%. The total cost is less than 100, and it can dry 4 rolls of PLA at once. If the temperature is set too high, it may damage AMS or the t