Helix Keyboard Case with spacers

This is my first design, appreciate S_Dev for the files for me to work off of.

This is designed for low profile Kailh switches or similar low profiles. I am working an a version for Cherry MX type switches.

I did not have the standoffs I needed so I designed it with them printed in. I also added a hole for the USB and Headphone jack. Added a small hole to reset.

The tolerances are very tight, you will need to slot the headphone jack in the hole, then angle the board down on the standoffs to get it together. Just add the plate for the keys and secure with M2x3mm.

IMPORTANT. The headphone jacks on both my Helix build are 1.5 mm offset. Same thing for the pro micro. I moved both the cut outs for the difference.

Parts needed: 18 M2x3mm screws

****12/6/20 - Added Cherry MX Design, Enjoy!