Helldiver Middle Finger Hueforge

Print for democracy. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x199.73mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm #080a0d PLA PolyLite Black Transmission Distance: 0.3 #545454 PLA BambuLab Basic Dark Gray Transmission Distance: 0.6 #000000 PLA BambuLab Matte Charcoal Transmission Distance: 0.6 #fec600 PLA BambuLab Basic Sunflower Yellow Transmission Distance: 2 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5 #d1d3d5 PLA BambuLab Basic Light Gray Transmission Distance: 1.7 This print uses 6 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Dark Gray At layer #13 (1.12mm) swap to Charcoal At layer #18 (1.52mm) swap to Sunflower Yellow At layer #22 (1.84mm) swap to Jade White At layer #25 (2.08mm) swap to Light Gray for the rest. For single AMS unit there is a pause added after the