MakerWorld

Other Tools

HelloBaby Wall Mount

by JOPG · Other Tools

293 Downloads

53 Likes

219 Makes

This is a mount for the HelloBaby camera with the twist mount. Printed at .28mm layer lines, 3 walls with supports. It can be screwed into the wall or as I am currently using it, stuck to the wall with command strips or something similar

Category

Other Tools

Source

MakerWorld

Published

05.07.2024

Updated

30.04.2026

What you need to print this: Intermediate Medium confidence

Why?

supports needed · 0.28mm layers

Single piece Supports required

Supports 2/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Min. bed size

50 mm (Small)

Layer height

0.28 mm

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for HelloBaby Wall Mount?

Any FDM printer should handle HelloBaby Wall Mount just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 50 mm is recommended.

Does HelloBaby Wall Mount need supports when printing?

Yes, HelloBaby Wall Mount will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

What file format is HelloBaby Wall Mount available in?

HelloBaby Wall Mount is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is HelloBaby Wall Mount free to download?

Yes, HelloBaby Wall Mount is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

HelloBaby Wall Mount

Similar Models

Add to Collection