Hellraiser - Pinhead Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 172.4x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mmFilaments Used: (* = Owned) #000000 * PLA BambuLab Matte Charcoal Transmission Distance: 0.6 #c00d1e * PLA BambuLab Basic Red Transmission Distance: 4 #cbc6b8 * PLA BambuLab Matte Bone White Transmission Distance: 1.6 #ffffff * PLA BambuLab Matte Ivory White Transmission Distance: 3.5This print uses 4 unique filamentsSwap Instructions: Start with Charcoal At layer #8 (0.72mm) swap to Red At layer #13 (1.12mm) swap to Bone WhiteBorder Only Colors from here until the end. At layer #22 (1.84mm) swap to Ivory White for the rest.