Thingiverse
Hellsing Brooch - Seras uniform
por Hoxdolum
53
Descargas
57
Likes
1
Makes
Piece i needed to upgrade on a costume from Hellsing ultimate , Used Tamiya flat aluminum with clear gloss coat and 2 cutted 3mm head bolts superglued,
This also has 2 tabs on the back to easily sew onto the collar .
Other version has bolts in case you didn't want to super glue shaved head bolts (3mm) to each side.
size is 55mm in length , 13mm high and 6-9mm depth
printing setting:
IF LETTERING ISN'T SHOWING THEN YOU NEED TO MESH SEPARATE
layer - 0.1mm height
extrusion width - 0.30mm ( if higher the letter may not print out at all )
Print time 37 minutes average
This also has 2 tabs on the back to easily sew onto the collar .
Other version has bolts in case you didn't want to super glue shaved head bolts (3mm) to each side.
size is 55mm in length , 13mm high and 6-9mm depth
printing setting:
IF LETTERING ISN'T SHOWING THEN YOU NEED TO MESH SEPARATE
layer - 0.1mm height
extrusion width - 0.30mm ( if higher the letter may not print out at all )
Print time 37 minutes average
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
