Helping-Hands Remix

Printing on its side did not work for me so I rotated 90 degrees and trimmed 1/2 mm from the bottom to make it sit perfectly flat. Prusa slicer would not attach the brims to the objects - minor gap - even when I disabled anti-elephant-foot setting so I added brims to the parts before slicing. My 0,45 mm thick brims remove very easily - I pulled them off with my fingernail. This approach requires no supports and no sanding.

I wanted to screw these to a spot on my soldering work station that is about 10mm thick so that is why I made the screw-on base. Otherwise you can use bases others have already made in other remixes.

I include the bits without brims also if adding them in your slicer app works good for you.

Added Bonus: if you go to Tinkercad and search for Helping Hands with Screw-On Base you can edit these bits any way you want.

Tip: I printed mine in ABS. If they wear and become loose fitting over time then I can brush some ABS glue onto the balls to make them t