Thingiverse
HEQ5 rail kit
von smolter
1
Downloads
6
Likes
1
Makes
Support for altitude screw on HEQ5
----------------------------------------
The measurements are from John Williams described in https://jpwilliams.com/Astronomy/Hardware/Mount-Rail/index.html, 5mm extra included as recommended. His excellent description shows also how to disassemble the mount.
You will also need a small metallic disc with a diameter just under 17 mm (a Euro Cent will do) and a 5.3 x 15 mm washer to distribute the force of the screw. Just glue them into the deepening of the glider. I printed all from PETG with 100% infill for the same reason.
The hexagonal hat with the small disc can be used to attach the latitude scale to the center scew, so it will be easier to remove it in the future. The brand sign on the other side can simply be reattached with a magnet of 2 mm thickness.
----------------------------------------
The measurements are from John Williams described in https://jpwilliams.com/Astronomy/Hardware/Mount-Rail/index.html, 5mm extra included as recommended. His excellent description shows also how to disassemble the mount.
You will also need a small metallic disc with a diameter just under 17 mm (a Euro Cent will do) and a 5.3 x 15 mm washer to distribute the force of the screw. Just glue them into the deepening of the glider. I printed all from PETG with 100% infill for the same reason.
The hexagonal hat with the small disc can be used to attach the latitude scale to the center scew, so it will be easier to remove it in the future. The brand sign on the other side can simply be reattached with a magnet of 2 mm thickness.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!