Hex bit box for 4mm (5/32) driver bits

I wasn't able to find a bit case stl that really suited my needs, so I decided to learn OpenSCAD and make my own! I uploaded 7x16 (112 bits) and 7x17 (119 bits) versions but you can make anything x anything by modifying the scad file.

Assembled photo taken before perfecting the scad file. I adjusted the hinge height, increased the bin width, increased the bit hole tolerance, and made a couple other minor changes before making this current stl and uploading it.

Making your own modifications should be easy -- just open the (imo) well-documented .scad file in OpenSCAD and adjust the constants as you see fit. Changing the size of the bit holes, how many holes across x or y, or changing any of the measurements should be trivial even with limited or no OpenSCAD knowledge.

Made with the [BelfrySCAD hinge module](https://github.com/BelfrySCAD/BOSL2) -- you should be able to just stick a piece of filament in the hinge to use as a pin! (unfortunately this means that the customizer likely wo