Thingiverse
Hexacopter Drone Leg
par kevinb42
2
Téléchargements
2
Likes
0
Makes
I use these in a set of three on a Hexacoptor, mounting one under every other arm. Three legs is very stable, much better than the normal "T" shaped legs.
It is designed to be used on a S550 Hexacopter drone. The leg mounts directly under the motor. You will need longer screws so the screw goes through the base of this leg and in to the motor. Make sure you don't use too long screws though, or it could damage the motor. The mounting holes are aligned to fit motors like the 2212-920KV or similar where there are two on a 19mm diameter and two on a 16mm diameter spacing.
They are about 200mm tall.
It is designed to be used on a S550 Hexacopter drone. The leg mounts directly under the motor. You will need longer screws so the screw goes through the base of this leg and in to the motor. Make sure you don't use too long screws though, or it could damage the motor. The mounting holes are aligned to fit motors like the 2212-920KV or similar where there are two on a 19mm diameter and two on a 16mm diameter spacing.
They are about 200mm tall.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
