Thingiverse
Hexadecimal D16
von majikthyze
30
Downloads
23
Likes
0
Makes
D16 with flattened ends so it can be more easily printed from the point. This requires supports but it limits the supports to the bottom half.
The image was printed at 0.1mm/layer and at 150% scale.
The image was printed at 0.1mm/layer and at 150% scale.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
