HexaGlow - 3D Printed hexagonal e27 Lamp

Printer: Used Settings on the Bambu A1 MiniNozzle Size: 0.2 mmShadeLayer hight: 0,2 mmMaterial: Landu PETG WhiteTemp: 240 °CBed Temp: 75 °C (first Layer 80 °C)BaseMaterial: PLA MatteLayer hight: 0,16 mmBottom Layers: 2 mmWalls: 3 (2 were not testet but coud be enough)Infill: 5 % GyroidShadeWall Generator: ArachneWall Thickness: StandardWalls: 2Bottom Layers: 3Print SpeedOuter Walls: 100 mm/sInner Walls: 120 mm/sFuzzy Skin Settings (for both)Fuzzy Skin: Enabled (Contour only)Fuzzy Skin Noise Type: VoronoiPoint Distance: 0.5 mmStrength: 0.2 mmFeature Size: 1.4 mmEstimated Print Time & Filament UsageShadePrint Time: ~3 hours 50 minutesFilament Usage: 82 gBasePrint Time: ~5 hours 40 minutesFilament Usage: 170 gRemove the fuzzy Skin in the lamp socket with a modifireLighting SetupThis lamp is designed to be used with:A standard E27 renovation socket (E27 retrofit fitting)Socket Dimensions (for fitting into lamp)Outer Diameter: approx. 38 mmHeight: approx. 42 mm (if part of the cable guide is removed)A smart LED bulb recommendet(Desinged for https://amzn.eu/d/cAQPfQO - Others with similar dimensions should fit as well)⚠️ Note: Make sure the bulb stays cool and does not exceed typical LED wattage (max ~10 W recommended).The lamp is designed for indoor decorative use only.Size:Hight: ~ 220 mmDiameter: ~ 140 mm