Hexagon patterns for Tulle

[Edit 4-3-2019]

----------------
So this thing blew up. I'll add a more comprehensive explanation of my own attempts on this Tule Fabric. I have successfully printed some pieces, like eight 17x17 pieces, and a few 21x21 pieces. In ABS. (don't do this, use PETG or PLA.. eventhough PLA will get brittle)

Main tips:
- Use a low temperature spectrum of your plastic of choice.
(Mine is PETG nowadays, so that would be 220 degrees C instead of 240. With a 60 degree C heated bed instead of 70.)
- Don't go to cold on the heated bed as the plastic will warp.
- Don't use a part cooling fan, because of plastic warping.
- Do not over-tighten the Tule-fabric when placing it down
- Watchout with burning yourself with the heated bed and nozzle!
- Don't let the Tule fabric touch the nozzle!

- Maybe tell the printer to use ''Surface Ironing'' to make the top surface more flat. If printed on a mirror, you probably want to have the bottom, so add the pauze command at layer 3 or higher.