Slicer Discord
Hexagonal Shelf Display 6cm - IKEA Pegboard Accessory – 3D printable model from MakerWorld MakerWorld
Other House Models

Hexagonal Shelf Display 6cm - IKEA Pegboard Accessory

291 Downloads
230 Likes
78 Makes
Go to Model
适用于宜家 Skadis 和我设计的「无限拼装洞洞板」:https://makerworld.com/zh/models/932107 正六边形边长6cm,纵深6cm,内高约为10.4cm。还有边长4cm的版本:https://makerworld.com/zh/models/918532 本设计由两个系列的模块组成:A系列是不同形状蜂窝模块单元,可以随意拼搭;(A2、A3模块均已超出A1 mini的最大打印尺寸)B系列是带挂钩的蜂窝模块,必须放置在最底层。(由于6cm是宜家洞洞板间隔4cm的1.5倍数,因此B系列挂钩模块必须奇偶搭配交替使用) 蜂窝模块单元无固定的设计,如要加固可以在模块后面使用透明无痕双面胶将其与洞洞板粘连。 更多宜家洞洞板配件,可浏览此合集:https://makerworld.com/zh/collections/4150292
Category
Other House Models
Source
MakerWorld
Published
Updated
What you need to print this: Beginner Low confidence
Single piece
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 0/3
Printer
FDM / FFF
File format
STL
Material
PLA
Software
Cura, PrusaSlicer, or similar
No ratings yet
No comments yet – be the first!

Similar Models

1 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection