Hexagonal Socket Identification Tag/Label (INCH)

No longer loose your time searching for the right socket on your bench : just tag them!This is an easy solution I use to identify my hexagonal sockets : just push the label inside them with your finger or with a screwdriver by pushing on the edges. The tag will stay in place thanks to its calibrated dimension which has a slight oversize. I have them since more than a year and they does not move at all. (picture below show the “metric” version" in 6-point “hexagonal” version) This model is for Imperial Inch Hexagonal sockets (6 points) and Bi-Hexagonal sockets (12 points). (You can use the 6 points model on 12 points sockets obviously)There is another model for metric dimensions here : https://makerworld.com/en/models/1196279-hexagonal-socket-identification-tag-label#profileId-1208962 The sizes available are as follow :First Plate : 5/32 to 3/8 (beware those one will be just barely readable with a 0.4 nozzle) then 7/16 to 1-1/4 (0.4mm nozzle is ok for those)Second Plate from 5/32 to