Thingiverse
Hexasphericon (Wibbly)
por Foxofalltrades
27
Descargas
18
Likes
0
Makes
My take on the Hexasphericon (or wibbly), inspired heavily by [Maker's Muse](https://www.youtube.com/watch?v=wb29-ULRBaE&t=0s).
Unfortunately, I never actually took a picture of the finished 3D print, because I was too excited about moving onto the next phase of the project: casting it in brass.
It turned out extremely well, trick is using a vacuum casting machine though, not sure if normal casting could get the detail, but its possible to see the layer lines even at 0.1mm.
If you want more info on the casting procedure I have a short tutorial [here](http://foxsdaybook.tumblr.com/post/177328833802/hey-all-made-a-hexasphericon-or-as-i-like-to), or you can message me for more specifics!
I've included the sketchup model (sketchup is free, not the best for 3D printing, but it works), so feel free to play with the design a little.
Unfortunately, I never actually took a picture of the finished 3D print, because I was too excited about moving onto the next phase of the project: casting it in brass.
It turned out extremely well, trick is using a vacuum casting machine though, not sure if normal casting could get the detail, but its possible to see the layer lines even at 0.1mm.
If you want more info on the casting procedure I have a short tutorial [here](http://foxsdaybook.tumblr.com/post/177328833802/hey-all-made-a-hexasphericon-or-as-i-like-to), or you can message me for more specifics!
I've included the sketchup model (sketchup is free, not the best for 3D printing, but it works), so feel free to play with the design a little.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
