Thingiverse
HexBoxStorage Interconnected (connect at base only)
par Michaelo
21
Téléchargements
45
Likes
0
Makes
A variation of my Hex Storage Box, except interconnect is only at the base in an effort to simplify and improve aesthetics ...
Height: 30mm
Max Width: 60mm
Base & Wall thickness: 2.5mm (* 2.0mm)
Print time: 1 hour @ 0.2mm layer height, 2 hours @ 0.1 layer height 0.1...
The first print interconnect (gripping part) has height of 2.5mm, is primarily intended for alignment. The second version with a taller gripping part of 7.5mm should provide a permanent connection...
*The heartboxgrip2x7.5mm.stl has 2mm wall thickness and the grip is 7.5mm tall...
Mike
Height: 30mm
Max Width: 60mm
Base & Wall thickness: 2.5mm (* 2.0mm)
Print time: 1 hour @ 0.2mm layer height, 2 hours @ 0.1 layer height 0.1...
The first print interconnect (gripping part) has height of 2.5mm, is primarily intended for alignment. The second version with a taller gripping part of 7.5mm should provide a permanent connection...
*The heartboxgrip2x7.5mm.stl has 2mm wall thickness and the grip is 7.5mm tall...
Mike
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
