HexiBox Series: Motor

As seen on X and YouTube:Designed for use with a pair of the Dayton Audio TCP115-8 4" midbass drivers, and a Dayton Audio DS175-PR 6.5" passive radiator. The two drivers should be wired in parallel, with the forward driver wired out of phase. Use M4 threaded inserts 6mm deep / 6mm outer diameter, and reusable adhesive to seal around everything. Set the high pass no lower than 45Hz, low pass around 80Hz. ~10W should be enough for it to play at volume. The companion pods should only need a ~100Hz high pass filter.Midbass Drivers:https://www.parts-express.com/--295-416Extended Range Drivers:https://www.parts-express.com/--295-349Passive Radiator:https://www.parts-express.com/--295-498Threaded Inserts:https://www.amazon.com/gp/product/B0CS6XGMFDScrews:https://www.amazon.com/gp/product/B0BMQ4WV1VBinding Posts:https://www.amazon.com/dp/B07PFMD1N2Recommended printing settings:PLA is okay; PETG is better.At least 4 walls (perimeters) all the way around.At least 20% gyroid infill. (High