Thingiverse
Hictop Adjustable x axis
von Thumper72
24
Downloads
10
Likes
0
Makes
6/17/2021 After 4 years of use the small adjuster part finally broke and needed to print another one..going to use petg this time to see how long it lasts instead of pla..
i made the side opening 10mm so i can use a adjustable x axis on my 3dp11 hictop printer, everything fits perfectly from what i can tell so far....so you will need a 6mm bearing,you will need a 624zz bearing ...https://www.youtube.com/watch?v=A7o8NPfUzn4&feature=youtu.be
i want to thank https://www.thingiverse.com/thing:554719 for making this and the use of his part in my remix to make this possible.
you will need one 4mm screw and lock nut for the bearing and the rest is all stock except the end 3mm screw which if i recall correctly is 25mm long
i made the side opening 10mm so i can use a adjustable x axis on my 3dp11 hictop printer, everything fits perfectly from what i can tell so far....so you will need a 6mm bearing,you will need a 624zz bearing ...https://www.youtube.com/watch?v=A7o8NPfUzn4&feature=youtu.be
i want to thank https://www.thingiverse.com/thing:554719 for making this and the use of his part in my remix to make this possible.
you will need one 4mm screw and lock nut for the bearing and the rest is all stock except the end 3mm screw which if i recall correctly is 25mm long
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
