Thingiverse
HiFiBerry DAC+ Zero Pi Zero W Case
by skyform
44
Downloads
22
Likes
0
Makes
Case for a Pi Zero W with a Hifiberry Dac+ Zero, as well as an option for a soldered on 3.5mm audio jack on the Dac+ Zero (see pictures-white one has jack).
I included a version that uses M3 2-3mm screws to hold down the pi, but note these are a very tight fit in the holes of the pi itself. ***Go slowly to avoid cracking the Pi***. The holes in the STL are 2.8mm.
This is designed to fit a **Pi Zero w 1.3**, which requires a millimeter or so of extra space for the camera connector. **It will also fit previous versions** without the camera connector.
**NOTE:** Take the SD card out when installing/removing the Pi. Once the Pi is in the case, it is very difficult to remove with the DAC attached because the USB port gets stuck. I may change this in a future version (let me know if you want the change!)
Also-this case is a really really tight fit. I still need to modify the 3.5mm jack model because, as you can see from the picture, it cracked upon install.
---
###**What ca
I included a version that uses M3 2-3mm screws to hold down the pi, but note these are a very tight fit in the holes of the pi itself. ***Go slowly to avoid cracking the Pi***. The holes in the STL are 2.8mm.
This is designed to fit a **Pi Zero w 1.3**, which requires a millimeter or so of extra space for the camera connector. **It will also fit previous versions** without the camera connector.
**NOTE:** Take the SD card out when installing/removing the Pi. Once the Pi is in the case, it is very difficult to remove with the DAC attached because the USB port gets stuck. I may change this in a future version (let me know if you want the change!)
Also-this case is a really really tight fit. I still need to modify the 3.5mm jack model because, as you can see from the picture, it cracked upon install.
---
###**What ca
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
