Thingiverse
Hifiberry Digi + Case
di zpell41
11
Download
6
Likes
0
Makes
This is a case designed to be used with a Raspberry Pi and Hifiberry Digi +. It may work with other hifiberry Hats but i have not tested others. The case is designed to be simple, very strong, and look good while having sufficient air flow to keep the Pi and Digi + cool.
Assembly uses the stock hardware that comes with the Digi + to mount the Pi to Digi + and Case along with the following items.
Noctua NF-A4x10 5V or equivalent fan. The Noctua fan comes with rubber Anti-vibration mounts that will work to mount the fan. You can also use four M3x5x6 threaded heat inserts with four M3x16 SHCS screws for mounting other fans.
Four M3x5x6 threaded heat inserts commonly found on Amazon, Aliexpress, and McMaster Carr with four M3x16 SHCS screws are used to mount the lid.
Hardware Sumary
1. Noctua NF_A4x10 5 V or equivalent fan.
2. Noctua rubber Anti-vibration mounts.
3. 8 - M3x16 SHCS screws
4. 8- M3 threaded heat set inserts.
Assembly uses the stock hardware that comes with the Digi + to mount the Pi to Digi + and Case along with the following items.
Noctua NF-A4x10 5V or equivalent fan. The Noctua fan comes with rubber Anti-vibration mounts that will work to mount the fan. You can also use four M3x5x6 threaded heat inserts with four M3x16 SHCS screws for mounting other fans.
Four M3x5x6 threaded heat inserts commonly found on Amazon, Aliexpress, and McMaster Carr with four M3x16 SHCS screws are used to mount the lid.
Hardware Sumary
1. Noctua NF_A4x10 5 V or equivalent fan.
2. Noctua rubber Anti-vibration mounts.
3. 8 - M3x16 SHCS screws
4. 8- M3 threaded heat set inserts.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
![Audiophile Music Player - Audio Streamer [v.2]](https://wsrv.nl/?url=https%3A%2F%2Fmakerworld.bblmw.com%2Fmakerworld%2Fmodel%2FUSd383ec80b60461%2Fdesign%2F2024-10-05_083f8ec3f6c5a.jpg&w=400&h=300)
