High-precision Compliant XY-Positioning Device

Hello, This is a compliant mechanism that can be used for percise positioning in two directions. The dimensions of the Compliant XY-Positioning Device are approx. 69 x 61 x 8 mm The range of motion in X is approx. 1 mm; the range of motion in Y is approx. 2 mm. The mounting holes on the side have a diameter of 3 mm; the mounting hole in the center has a diameter of 4 mm. How should you print it?The Compliant XY-Positioning Device consists of only one part and can be printed in around 2.5 hours without supports. I recommend a 0.2 mm layer height, a 20% gyroid infill (you can use a higher infill to make it even more durable if you like) and PLA. How do you assemble it?You need the following parts:2 x Screw M32 x Nut M31 x Printed mechanism1 x Knife or scalpelUse your knife or scalpel to cut through the thin wall on the side of the mechanism. This will create an elongated hole. Be careful not to cut yourself!Insert the M3 nuts in the mechanism. Make sure that one of the edges points downw