Higrometer magnetic holder – 3D printable model from MakerWorld

MakerWorld

Electronics

Higrometer magnetic holder

by Szymi · Electronics

17 Downloads

4 Likes

11 Makes

Go to Model

🧲 Magnetic Hygrometer Holder for Bambu Lab AMS / Chamber / Drawer Perfectly fits the cheap round hygrometers (Ø45mm).⭐ FEATURES: • 100% print-in-place (NO supports!) • Super strong hold – 2x Ø12x3mm neodymium magnets • Snaps onto AMS top vent or any iron-metal surface • Minimal filament (only 12g / 1h print) • Works with A1 Mini, P1S, P1P, X1C🧲 MAGNETS YOU NEED: 2x Ø12x3mm round neodymium⚙️ PRINT SETTINGS (already included): • 0.2mm layer / 0.4 nozzle • 15% gyroid infill • 3 walls / 4 top-bottom, NO brim Works perfectly with PLA, PETG, ABS. 🔥 #BambuLab #AMS #Hygrometer #Magnetic #Practical

higrometer magnetic thermometer bambu lab AMS hygrometer magnetic mount humidity sensor a1 mini p1s x1c print in place useful

Category

Electronics

Source

MakerWorld

Published

06.11.2025

Updated

30.04.2026

What you need to print this: Beginner

Why?

print-in-place design · no supports · 2 colors · 0.20mm layers

Support-free Print-in-place 2 colors / AMS Hardware needed

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 1/3

Printer

FDM / FFF

File format

STL

Material

PLA, ABS, PETG

Colors

2 (AMS/MMU recommended)

Layer height

0.2 mm

Est. print time

1 h

Post-processing

Hardware

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does Higrometer magnetic holder need supports when printing?

Nope — Higrometer magnetic holder is print-in-place, so it comes off the bed ready to use. No supports, no assembly.

How long does it take to print Higrometer magnetic holder?

According to the design notes, Higrometer magnetic holder takes approximately 1 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

Is Higrometer magnetic holder beginner-friendly?

Yes — Higrometer magnetic holder is a solid beginner print. Nothing tricky going on here, good choice if you're just getting started.

What file format is Higrometer magnetic holder available in?

Higrometer magnetic holder is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is Higrometer magnetic holder free to download?

Yes, Higrometer magnetic holder is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee

DE EN FR ES IT NL