Hinge for rc glider

#Needs to be print with layers of max 0.2mm#2 perimeters#2 layers top/bottom#Infill 15%#Temp around 220c first layer / 210c for all other layers#Bed temp 65c first layer/ 56 all other layers #No need support or brim or skirt if place on the heat plate as show on one of the pictures.#Use a simple paper clip to link the two parts, bend gently the tip of the paper clip to secure it.#A paper clip standard, is 0.7mm diameter#The hole is 0.9 to compensate eventual printing mistakes, problems#I made like that to be fit perfectly and minimise parasites mouvements Edit 04/02/2024now hinge are the right sizeEasy to cut if you need to short them