Hippo Planter

Hippo Planter with a couple of print profiles. Non-drainage designs are provided. The planters are 84 mm height x 165 length x 86 width. Supports are required and challenging to keep the belly manageable. 2 print profiles included using the same slicer supports settings,one has a 10 mm brim and one doesn't.The brim is not really needed but if more traction is required, it is there. The slicer settings:.20 mm Standard Filament: Sunlu Meta Cream WhiteInfill % - 10 , GyroidWall Loops - 5Bottom Shell - 5Seam: Aligned The settings for supports: Tree(Manual)Angle: 25Build Plate OnlyRemove Overhangs In order to make supports easier to remove, the filament temperature was changed from 220-220 to 220-205. Then the other settings: Support wall loops: 1Top Z distance: 3.5-4.0Bottom Z: ,16Base Pattern: HollowBase pattern Spacing: 3Top Interface layers: 1Bottom Interface layers: 1Top Interface spacing: 0.8