Hiprecy LEO - Y Axis Linear Rail Conversion

I made these designs to convert the LEO Y axis to a linear rail system. 10mm of build height will be lost with this conversion.

Parts needed:

-Linear Rail & Block, 300mm, MGN12C (2 sets)
-Linear Block, MGN12C (1)
-M3 x 8 Screws (14)
-M3 x 24 Screws (2)
-M4 x 12 Screws (8)
-M3 T-Nuts (14)
-Print of 'Y Linear Rail Bracket L' (1)
-Print of 'Y Linear Rail Bracket R' (1)
-Print of 'Y Linear Rail Belt Spacer' (1)
-Print of 'Y Linear Rail End Cap' (4, 1 of each)
-Print of 'Linear Rail Alignment Tool' (3)

This conversion is a bit trickier than the Z and X conversions. I'm including some instructions and photos to help with this one.

Assembly:

-Remove the 6 screws holding the heated build plate to the Y carriage. Don't lose the spacers that are going to fall out. Move the build plate out of the way.
-Remove the 2 screws holding the Y belt block to the Y carriage.
-Remove the rollers from the Y carriage. There is no room for an Allen wrench under the screws