HMF Y600 tail mount

Had a massive crash and broke the mounts that attach the tail mech to the arm, so I designed some replacements.

I didn't want to take the entire copter apart and desolder motor wires, as I had them running through the arms, I designed these as a split mount, which is bolted together.

You will need, 2.5mm diameter bolts and lock nuts to fit.
A 3mm drill bit is also needed to "counter sink" the bolts head so the tail fin/servo plate sits flat.
It's also helpful to ream out the big holes closer to the motor by 2mm depth, to allow the tail to pivot and not bind. (do not go all the way or your bearing will be loose)