Holding Jig

Here is a holding jig for the Snapmaker original.

I used M6 screws (any length is fine, mine are 2.5") and M6 nuts.

The holding jig CANNOT be printed on the snapmaker original. I am working on a design to make it available to be printed on the snapmaker.

You will need:
1 - Holding Jig
6 - pushers
6 - M6 screws
6 - M6 nuts

Assembly instructions:

1.) print all parts
2.) mount the M6 screws into the hex slots on the outside edge of the holding jig. Add glue to ensure they do not come unmounted
3.) screw the M6 screws into the nuts from the inside of the holding jig
4.) place the pushers onto the plate to align with the hex head of the M6 screws
5.) use the 4 mounting holes on the edge to mount the piece on your plate
6.) mount your plate onto your machine

Alternative option:
The pushers can be slotted over the M6 screw and be removed top side.