Home Alone Hueforge

4 or 5 color Hueforge of the Home Alone DVD cover with a small frame around the print to add rigidity. It's a great print to run overnight and wake up to the magic of Christmas :) Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.1mm Filaments Used: PLA Elegoo Rapid PLA + Black Transmission Distance: 0.9 PLA Generic Blue Transmission Distance: 3.5 PLA BambuLab Basic Red Transmission Distance: 4 PLA Generic Yellow Transmission Distance: 7.6 PLA+ 2.0 Sunlu White Transmission Distance: 5 This print uses 5 unique filaments though you may choose to omit the blue as it just adds a small amount of “twinkle” to the lights Swap Instructions: Start with Black At layer #5 (0.48mm) swap to Blue **YOU MAY CHOOSE TO OMIT THIS WITHOUT MUCH IMPACT TO THE PRINT** At layer #8 (0.72mm) swap to Black At layer #11 (0.96mm) swap to Red At layer #15 (1.28mm) swap t