Honda Talon Rain Gutter

This is for the Honda Talon roof where the water drains right on your knee. It will divert the water towards the front and also catch the water from the top rail and direct it down the A pillar into a plastic tube. I ran it down the A pillar and into the body panel and it drains out from there.

Print with ABS with the large flat side down. Once printed then use Black Silicone to attach to the roof. You will need to buy a tube to connect to the drain hole. The inside is 3/8" and you could probably stretch a 3/8" tube over it if you get the right tubing. 1/2" tubing may need a zip tie or something to hold it on.