Horizontal Universal Spool Holder

This is a horizontal spool holder designed to use 608 ball bearings and imperial hardware. I designed this holder one to include a pin that threads into the middle of the rotor that can be swapped out based on the spool used. I've uploaded pins for Inland and Prusa PLA but it should be easy to modify the pins for other manufacturers. The pin and rotor use an M10x1.5 thread if you need to make your own pin. The ball bearings are mounted using 10-24x3/4" bolts and 10-24 nuts. The bushings are used to reduce the ID of the bearings to a close-clearance hole for the bolts.

You will need:
* 10-24x3/4" bolts x3
* 10-24 nuts
* bushings x3
* rotor x1
* base x1
* how many pins you think you need

Supports are needed for the base but should not be used for the pins or the rotor since this makes cleaning the threads very difficult.

Designed in Fusion 360