Horror Sister HueForge

Artwork author Jo CortThen used HueForge v0.9.1 to create the model. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.Size is 150x200mm. You can only modify the X and Y dimensions. Do not adjust the height (Z) in your slicer! The layers would not be correct. You may print at higher layer heights below the Min Depth of 0.48mm. The Max Depth is 2.08mm and the Actual Depth is 2.08mm. It is possible to print without AMS by manually changing the filament (setting filament change or pause) in the slicer, depending on your printer and sw support. Filaments Used:PLA Anycubic Black Transmission Distance: 0.3PLA Sunlu Meta Grey Transmission Distance: 3.5PLA Elegoo Basic White Transmission Distance: 7This print uses 3 unique filaments Swap Instructions:Start with BlackAt layer #10 (0.88mm) swap to GreyAt layer #13 (1.12mm) swap to White for the rest. Share your print and…Boost MeThank you!