Hot Wheels

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x190.49mm in sizeYou may print at higher layer heights below the Min Depth of 0.8mmThe Max Depth is 2.6mm and the Actual Depth is 2.3mmFilaments Used:PLA PolyLite Black Transmission Distance: 0.3PLA BambuLab Basic Red Transmission Distance: 4PLA Kexcelled Sky Blue Transmission Distance: 2.6PLA BambuLab Basic Orange Transmission Distance: 7PLA BambuLab Basic Yellow Transmission Distance: 6This print uses 5 unique filamentsSwap Instructions:Start with BlackAt layer #11 (0.96mm) swap to RedAt layer #16 (1.36mm) swap to Sky BlueAt layer #19 (1.6mm) swap to OrangeAt layer #22 (1.84mm) swap to Yellow for the rest.