MakerWorld
Signs & Logos
Go to Model
Hotwheels sign
67
Downloads
46
Likes
20
Makes
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmThe Model is 200x142.86mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA BambuLab Matte Scarlett Red Transmission Distance: 1.9 PLA BambuLab Matte White Transmission Distance: 3.5This print uses 2 unique filamentsSwap Instructions: Start with Scarlett Red At layer #38 (1.64mm) swap to White for the rest.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
