Thingiverse
HP Pro Desk Mini 600 G9 hdd caddy
by Fonzman
7
Downloads
2
Likes
0
Makes
This is a remix of the sATA HDD caddy from qwksilver.
This version is compatible with the 2024 **HP Prodesk Elite 600 G9 Mini**. With this caddy you can mount an additional sATA HDD atop the two M.2 slots. If doing so keep the computer in a well ventilated area, because the additional heat generated from the hdd might cause problems otherwise. In a quick test (about 2 hours reading and writing files) the hdd did not get over 55°C while the (single) M.2 SSD below was around 45°C.
I used blender 4.1 to edit and expand the original STL from qwksilver.
I printed it with a Zortrax M200 with medium infill. The whole thing used about 19g of filament.
*Disclaimer: Use at your own risk! I am not responsible for any damage to your computer when using this caddy!*
This version is compatible with the 2024 **HP Prodesk Elite 600 G9 Mini**. With this caddy you can mount an additional sATA HDD atop the two M.2 slots. If doing so keep the computer in a well ventilated area, because the additional heat generated from the hdd might cause problems otherwise. In a quick test (about 2 hours reading and writing files) the hdd did not get over 55°C while the (single) M.2 SSD below was around 45°C.
I used blender 4.1 to edit and expand the original STL from qwksilver.
I printed it with a Zortrax M200 with medium infill. The whole thing used about 19g of filament.
*Disclaimer: Use at your own risk! I am not responsible for any damage to your computer when using this caddy!*
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!