Thingiverse
HT Filament extruder
por Thybaut
79
Descargas
97
Likes
0
Makes
Cheapest filament extruder ever...
Hopper and mounting brackets are 3D printed.
Layer: 0.2 Infill: 50%
Hopper print time: 20H 47min - 72.58 /~ 216g.
Bracket print time: 03H 06min - 11.25m /~ 34g.
Tubes (central heating piping) and other parts came from local hardware store or "AliExpress". See parts-list for details on price etc.
Drill is one i had laying around with two speeds (set at lowest speed) and the button with the screw adjustment (this limits how far you can push the button). So speed of drill is set low and button is hold by means of a cable tie.
-update 25-02-19 First test run done (see pictures). Some fine tuning and printing the hopper remains.
Hopper and mounting brackets are 3D printed.
Layer: 0.2 Infill: 50%
Hopper print time: 20H 47min - 72.58 /~ 216g.
Bracket print time: 03H 06min - 11.25m /~ 34g.
Tubes (central heating piping) and other parts came from local hardware store or "AliExpress". See parts-list for details on price etc.
Drill is one i had laying around with two speeds (set at lowest speed) and the button with the screw adjustment (this limits how far you can push the button). So speed of drill is set low and button is hold by means of a cable tie.
-update 25-02-19 First test run done (see pictures). Some fine tuning and printing the hopper remains.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
