HTC Vive Controller Lashing Strap Grip Mod

Made a cheap and easy mod to make my Vive controllers more comfortable, the strap gives you a firm grip around your joints.

### Straps

Lashing straps needs to be 18mm x 2mm (width x height), optimal length is 0.5 metres. Excess length can be cut off, melt the edge after cutting.

### Pins

Each Vive controller seems to have different diametre for the screw holes. You need to either accurately measure the holes or print the "pins-testing-set.stl" and try out different pins for each controller.

Pins needs to be printed horizontally, otherwise they will break inside the holes on the controller. Print pins with supports, scrape off excess support layer on the pins before inserting to avoid wearing down the edges in the screw hole.

### Assembly

Demo and assembly video: https://www.youtube.com/watch?v=f3mUGDzB2Gk

1. Attach controller piece.
2. Insert pins.
3. Insert lashing strap, buckle facing to backside of controller.
4. Pull strap through the tracking ring.
5. L