Thingiverse
HTC Vive lighthouse drop ceiling mount - No extra hardware required!
par fc3sbob
13
Téléchargements
6
Likes
2
Makes
I made this to mount a vive lighthouse on a drop ceiling without having to use any hardware or damage the ceiling in any way, Unfortunately I've moved since I made this and didn't take any pictures. This mounts directly on the ceiling tile support struts. It's made for a ceiling with 25mm wide supports.
Once the spring part is clipped to the support, it becomes locked in place when the light house base is slid into the clips on the bottom.
It worked for me, I mostly made this with guesses and eye measurements so if it's a bit too loose or tight then scale it to whatever you need.
If you have doubts, you can do a test by stopping it 1/4 to 1/2 way and testing it out since it should be fully functional even if the print is stopped early, then adjust and make a full print.
Once the spring part is clipped to the support, it becomes locked in place when the light house base is slid into the clips on the bottom.
It worked for me, I mostly made this with guesses and eye measurements so if it's a bit too loose or tight then scale it to whatever you need.
If you have doubts, you can do a test by stopping it 1/4 to 1/2 way and testing it out since it should be fully functional even if the print is stopped early, then adjust and make a full print.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
