Hueforge - ALIEN Romulus 200x200

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.4mm Filaments Used: PLA BambuLab Matte Black Transmission Distance: 0.3 PLA BambuLab Matte Scarlet Red Transmission Distance: 2This print uses 2 unique filaments Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Scarlet Red for the rest.