Hueforge Atalanta B.C.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 84.41 x 150 mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #6 (0.56mm) swap to Blue At layer #14 (1.2mm) swap to Yellow At layer #20 (1.68mm) swap to Jade White for the rest.