HueForge - Baki Hanma

Project: Baki Hueforge.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 160x200.85mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used:PLA Overture Matte Black Transmission Distance: 0.1PLA Overture Matte Light Gray Transmission Distance: 1.2PLA Overture Matte White Transmission Distance: 3.2This print uses 3 unique filamentsSwap Instructions:Start with BlackAt layer #9 (0.8mm) swap to Light GrayAt layer #17 (1.44mm) swap to White for the rest. i Personaly suggest to use a Gray and White with a higher Transmission Distance, sadly the Overture Matte is really bad in that aspect but that was the only Filament i had right now.