Hueforge Bart Simpson

Project: Bart Grafiti.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 1.9mm and the Actual Depth is 1.7mmFilaments Used: PLA BambuLab Basic Yellow Transmission Distance: 4 PLA BambuLab Basic Black Transmission Distance: 4.1 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 3 unique filamentsSwap Instructions: Start with Yellow At layer #8 (0.72mm) swap to Black At layer #13 (1.12mm) swap to Jade White for the rest.